This vector design can be resized to suit your project—just be sure to select all elements in your laser software to keep proportions accurate. We recommend cutting at 11.5 inches or larger to preserve the fine details. The file includes color-coded lines for cutting (red), engraving (black), and scoring (blue), which you’ll need to set manually in your software.

The sample shown was cut using an xTool P2S on 6mm Baltic Birch for the base and 3mm basswood for the top layer, finished at approximately 11.6” x 11.6”.

Click below to visit our Etsy shop and grab the file today:

👉 Get the Magnolia Welcome Laser Cut Sign SVG on Etsy

SUPPLY LIST:

Below are ShapeHouse’s Amazon affiliate links to the products that can be purchased to make this project. If you make a purchase using one of these links, we earn a small commission — at no additional cost to you.

• Adrattnay Basswood Sheets 1/8 x 12 x 12 inch – 3 mm Basswood Sheets

• 1/4 Baltic Birch Plywood – 11.8 x 11.8 inch, Pack of 25, 6mm

• Gorilla Dries Clear Wood Glue, 4 Ounce Bottles or 3M Super 77 Spray Adhesive Aerosol Clear – 24 oz

• 30ml Glue Precision Tip Applicator Bottle

• Mister Rui Foam Paint Roller, 2 Inch Mini Paint Roller

• FolkArt 479 Acrylic Paint – Pure Black